Rechargeable Submersible Led Lights, HOMLY Pool Lights with Remote, Large Suction Cup, Magnetic Pool Lights for Inground Pool , Above Ground Pool, Underwater Light IP68 Waterproof Led Lights 4 Sets

Why Choose HOMLY?

1.Rechargeable Pool Light, Save Your Money!

HOMLY rechargeable pool light is powered by a large capacity rechargeable battery 2600mAh, it can work 55-130 hours for one full charged (Just 5 hours), charging by magnetic charging with USB cables.

2. Huge Suction Cup and Strong Antirust Magnet, Attach SUPER Tight, Will Never Fall! Suction cup:

1)Suctioin cup:

We enlarge the size of suction cup to 80mm (4 times larger ), and updated its structure, just push down the quick handle, the suction cup will be in vacuum status automatically, and stick SUPER TIGHT, cannot remove it until you loose the handle, release the sucking pressure. We fix the light into suction cup with a metal screw, no need to worry your pond lighting will fall again!

Note: If you want to remove the suction cup, please remove the pool lighting first, then pull up the handle to release the sucking pressure, finally lift up the small round silicone ear in the suction cup. (Don’t violently pull up the suction cup, it’s too tight, may hurt your hand )

2) Antirust strong magnet:

We make the magnets outside of the water, to keep it always dry and antirust.

3. IP68 Full Waterproof!

We sealed the submersible led light with thicker sealing ring , and certificated IP68 waterproof , no need to open the underwater pool lights for charging, it will not leak!

4. RF Remote Control and Button Control

1)RF remote control: You can choose steady colors, color changing modes, timers, and brightness, memory function. One RF remote easily controls all the led underwater lights within max 200FT/61M (in air), 10-16.4FT/3-5M (underwater), convenient to use any where.

2)Button control: when you lose remote control, you can use button press to set, and if you want to make different lights display different colors, just press the button to set it, other similar light pool don’t have this function.

Please note:

1. Turn on the light.

1) You you first receive the light, please long press the button on the led light about 2 seconds to activate it, it will light up white color light automatically, after that, you can use the remote control or just press the button to set the colors, modes, brightness, timers you want. ( Very important! It must need to long press the button to activate the light before using the light)

2) If you don't want to use the light, long press the button again to turn off the light completly for saving power, if only use remote control to turn off, the light still consuming power, you can see a red light on in the button.

3) Only when you see the small red light on in the button of the light, it means the light is in connecting, you can press the button or use remote to control it, otherwise, long press the button to activate the light first.

2. Check if fully charged the light.

When the light is in charging, it keeps red light flashing, when fully charged, it will keep red light steady on about 3 minutes, then turn off automatically. You need to press the button on the light to activate the light before using, otherwise the remote will not response to the light.

3. Correct way to use suction cup.

1) Only work for flat and smooth surface, clean the surface before attaching, remove all lubricant like shower cream, moss in surface.

2) Stick the suction cup to the surface, press down the handle of suction cup,after the suction cup is used correctly, the direction of the handle and the small round silicone ear on the suction cup are consistent and close，the suction cup will stick super tight, finally screw up the light to the suction cup.Instead of installing the pool light on the suction cup first, and then sucking it on the wall, the suction cup will fall. Many buyers make this mistake, please pay special attention!

4.Check if remote control work.

1) Remove the plastic film at the bottom of remote.

2) Press any button, if the small light on the top of the remote is on, it means remote works well. Otherwise, please replace new battery 1x CR2525.