FLARING Plasma Cutter Machine Pilot Arc 50 AMP 110/220V FL550D Non Touch 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine

How does plasma cutter work?

What is Plasma?

Plasma cutters work by sending an electric arc through a gas that is passing through a constricted opening. The gas can be shop air, nitrogen, argon, oxygen. etc. This elevates the temperature of the gas to the point that it enters a 4th state of matter. Scientists call this additional state plasma. As the metal being cut is part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work.

How does it work?

The plasma arc formation begins when gas is forced through a small nozzle orifice inside the torch. An electric arc generated from the external power supply is then introduced to this high pressured gas flow, resulting in what is commonly referred to as a “plasma jet”. It immediately reaches up to 40,000° F, quickly piercing through the work piece and blowing away the molten material.

About the Air Compressor

FLARING plasma cutters need compressed air to create the plasma.

FAQ About The FL-500D

Advantage of the plasma torch

• FL-550D plasma cutter equipped with AG60 which is a non-touch cutting torch.
• Better for materials with coated,paint,stains, and rust on the surface with great effect.
• Cutting faster, more efficient than touch arc plasma cutter.
• Consumables are durable than PT31 torch

Consumable of the Plasma Torch

• The contact tips erode over working time,so they are required replaced periodically.
• Quality of the air used is paramount to their longer life, in short clean dry air gives longer parts life.

The Cutting Quality

• The correct height of the torch and cutting at a 90° can ensure longer life of the consumables,the best way to reduce the bevel angle is to cut with the correct current at an appropriate speed and height.
• The plasma flow may not be able to cut off the material completely if cutting higher and large angle.

After-sales Service

• FLARING provides 3-years of product quality service.
• Failures other than the machine case can be replaced within 30 days if you have a problem with the machines.
• Local support is available for all of our customers.

Manufacture Testing

• Accurate Test: continuing to provide high current to ensure that each machine can bear still can stabilize output
• Simulation Test: undergoes 30 minutes of simulation work, easily cope with voltage fluctuations
• Manual Test: achieve easy arc, continuous arcing

Certifications

• We are a traditional enterprise that integrates production,research,development and sales, has been deeply involved in the field of welding for nearly 10 years.with domestic and international basis as well as professional certification

High Frequency Transformer

• The FL-550D plasma cutting machine comes with 110V/220V voltage conversion cable which can recognize the voltage automatically
• Attention:it is recommended to use a circuit breaker above 40A for 220V,but 60A for 110V.

FL-550D Application

Any kind of metal that is electrically conductive is well suited. You can cut these kinds of metal from a sheet metal thickness of 1-2mm up to 1-2 inches:

• Mild Steel/Stainless steel
• Carbon steel/Copper
• Brass
• Aluminum
• Expanded steel