Description
- COMBO SET - Packed with digital thermostat and under tank heater. Reptile under tank heat pad provides your reptile gentle and constant warm 24 hours, and monitors and control the temperature all the time.
- UPGRADED VERSION - Upgraded adhesive material of under tank heat pad is more solid than similar products in the market. It effectively decreases and eradicates the probability of melting and separating.
- MOUNTING - Reptile heat mat with thermostat optional mounting on bottom or side of your terrarium. Rubber feet enclosed for bottom mounting to slight elevate terrarium and allow excess heat to escape. (IMPORTANT)
- SIMPLY SET UP - Heat mat thermostat simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display of seedling heat mat thermostat available in Fahrenheit and Celsius.
- SPECIFICATIONS - Hermit Crab Heater Size: 8” x 12” ; Voltage: 120 volt; Power: 16 watt; Temperature control range is 68-108°F, Digital Reptile Thermostat temperature display range is 32 -140°F.
- ATTENTION: Do not place on flammable substrate surfaces, such as wooden items, plastic, carpets, etc.Do not cover the heating pad with anything.Do not place glass containers in areas that may be exposed to direct sunlight.The Under Tank Heater can be placed underneath the tank or on the side of the tank depending on your set up. The Reptile Heating Pad should be placed on the outside of the tank only.
Product Description
Under Tank Heater Thermostat
Attention：
- The Under Tank Heater can be placed underneath the tank or on the side of the tank depending on your set up. The Reptile Heating Pad should be placed on the outside of the tank only. If you choose to place the heater on the underside of the tank, be sure to elevate the tank slightly using the included “rubber feet” or another method to prevent heat encapsulation.
- Do't place water dish above heater. Avoid spilling or spraying water on glass where heater is attached; water spilled directly on the glass where the heater is could cause a stress crack.
- Do't use the heating pad on aquatic tank, this combination can create stress cracks.
- Depending on the mounting, substrate, and other conditions the UTH can bring the temperature up by 2-8 degrees.
Note: If the bottom of your terrarium can get wet this could cause a “stress crack” with this type of heater. Always use a substrate that will absorb water and keep your water dish on the opposite side of the terrarium from the Heating Pad. Because of the many variables involved in terrarium glass thickness, set up and husbandry, we are not sure if heat pad will cause stress cracks in your glass containers.
AIICIOO Reptile Heating Pad with Temperature Control
AIICIOO Reptile Heat Pad is designed to economically heat reptile, amphibian, small, animal and plant terrariums.Terrarium heating pad are an ideal 24-hour primary or secondary heat source for tropical or temperate reptile and amphibian species and essential as a nighttime heat source for many desert species.
- Ideal for use with reptile, amphibian, small animals or plant terrariums.
- Upgraded adhesive side sticks directly to your terrarium for optimum heat transfer
- AIICIOO reptile heater range from 4 to 24 watts making them extremely economical to operate
- Can be used with a thermostat and/or in conjunction with an additional heat source for higher temperature species
- Optional mounting on button or side of your terrarium.
Reptile Heating Pad with Thermostat
Uniform Heat mat for reptilesReptile heat mat provide 24-hour primary or secondary heat source for tropical or temperate reptilian species. Suitable for snake,bearded dragon, leopard gecko,lizard,turtle and so on. | Upgraded AdhesiveAll under tank heater are upgraded, we changed the adhesive material to a new one that is more solid. | Easily InstallationAIICIOO reptile heat pad permanently adhere to your terrarium or incubator, forming a solid bond for optimum heat transfer. |
Grounded OutletTemperature control range: 68-108°F Temperature display range: 32 -140°F The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine. | Fahrenheit or Celsius readoutFahrenheit - Press and hold the 'Up' button for 3 seconds to display in Fahrenheit. Celsius - Press and hold the 'Down' button for 3 seconds to display in Celsius. | Easy to Set UpPress the UP or DOWN button to adjust the temperature The thermostat’s LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature. |
heating mat for reptiles and amphibian.
reptile heating pad for lizards | reptile heat mat for bearded dragons | under tank heater for snakes | reptile heat pad for hermit crabs |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security
