Pool Lights 4 Pack, Submersible LED Lights - Full Waterproof Underwater Pond Lights with Remote, Color Changing, Magnetic Bathtub Lights with Suction Cup Hot Tub Light for Pond Fountain Garden Party

GHUSTAR IP68 Waterproof Colors Changing Pond Pool Lights with RF Remote Control to Decorate Wherever You Want

• Have you been getting your backyard ready this summer and want to add light and color as decor to create a beautiful ambience?
• Do you want to create a party ambience for your pool or turn your bath time into a spa experience?

GHUSTAR Submersible LED Lights may be a simple and affordable solution to spark up your garden, pool, pond, or bathtub, bring you a definitely different using experience!

Newest upgraded submersible LED Pool lights - Updates:

• Newest Bauhinia appearance design with 11 LED beads provides amazing lighting effects.
• The lamp bead power is upgraded from 0.1w to 0.2w to ensure that the light is brighter underwater.
• 3 different chase modes have been added to the light-emitting mode to make it cooler.

100% Waterproof

1. Please close the cap tightly!

2. Actually the waterproof performance is to a great extent depends on the tightness you close the cap.

3. So please tighten the cover with maximum force after installing the battery to achieve the best waterproof effect.

Easy To Install:

• Screw off the lid.
• Install 3*AA batteries. (not included).
• Make Sure the sealing ring properly stays in the groove. Then twist the lid until it can not be twisted any further, to make it waterproof.

Tips When Using:

For LED Light:

• Actually the waterproof performance is to a great extent depends on the tightness you close the cap. Make Sure the sealing ring properly stays in the groove. Then twist the lid until it can not be twisted any further, to make it waterproof. the better the waterproof effect you will get.
• The function of the diving iron is to increase the gravity of your light without floating. If you want the light to float in the water, you can take out the diving iron.
• It’s better not to use in hot water because the vapor may go into the light which will damage the components and lead to stop working.
• When you change batteries, please wipe off the water in the light, to keep the batteries case dry.
• If you don’t use it for following a long time, please remove batteries, it will help save power and protect the led bulb.

For RF Remote Control:

• Please remove the plastic insulating film on the bottom of remote before using it.
• Please press the button "ON" for more than 3 seconds to activate the remote and the light before setting, to make all lights light up together. Press longer if some lights don't respond on time.
• Please press the remote to check the remote battery: normally you can see the red light on when pressing, if can't see, it means the remote is out of power, or it doesn't work, please replace new batteries.
• Please keep the remote dry from water, because it’s not waterproof, water will make it stop working.
• For underwater use, please keep the remote within 10FT/3M-16.4FT/5M because water will largely absorb the signal.

For Suction Cups:

• Suction cups can be used in both air and underwater on flat and smooth surfaces. But not work on the rough surfaces.
• Please clean the surface before attaching, make sure there is no stuff between the surface and suction cups. Especially, clean all the lubricants which may come from shower cream, moss in the swimming pool, etc.
• Please pull the suction cups vertically if you want to remove them, don't pull them horizontally, it may pull out from the hole, there is a feature of the design, it's not the suction cup problem. Please note, and use it in the correct way.

For Magnets:

• Work for any iron place to be attracted by magnet.
• Attach it on pure or rough vertical iron surface.

Tips for Suction Cups:

1. The suction cups can only be used on a flat and smooth surface. Please don’t attach it to a rough surface. Please don't attach the suction cup to the gap between the tiles.
2. Please clean the surface and make sure that there is not any stuff between the surface and the suction cup, and especially remember to remove the lubricated thing like shower cream, moss, etc.
3. Although the magnet is strong, it's better to attach it to a pure iron surface. Besides, the alloy material will reduce the attractive force between it and the magnet.
4. If you want to take the light out of the wall, please pull them out vertically. Don't drag the light horizontally.

What's in the package

• 4 x Submersible Led Lights with Magnet (batteries not included)
• 2 x RF Remote Control
• 12 x Suction Cups
• 1 x User Manual