SGLEDS 18W LED Security Lights Motion Sensor Light Outdoor 1800LM 5000K Flood Lights IP65 Waterproof 2 Head Adjustable Heads for Garage Yard Entryways Eave Soffit Front Door Step (NOT Solar Powered)

D2D Mode

• Light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor.
• D2D Mode only works at night. When it's bright around the sensor, it goes off automatically. Except Lux, Time and Range doesn't work while using this mode.

Auto Mode

• When sensor detects motion, it lights up for 1-10 minutes according to the time it has been set.
• While using auto mode, toggle switch off and 2 seconds later on again. Light turns on continuously for ca. 8 hrs and goes off at daytime.
• Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, light goes automatically back to Auto Mode.

On Time Mode

• Light can work as a standard LED light without motion sensing.
• Light turns on when switch on, turns off when switch off.
• On Time Mode can work during daytime and night. The Lux, Time and Range Setting doesn't work while using this mode.

Test Mode

• Light turns on for only 5 seconds during daytime or night once it detects motion.
• This mode is used for checking whether the sensor is working properly.
• Test Mode can work during daytime and night. Except Range, the Lux and Time Setting doesn't work while using this mode.

LUX Knobs

• Generally it's suggested to set the Lux in the middle position.
• For setting ambient brightness value to differ from daytime to night. If the ambient brightness value exceeds the setting Lux, it is defined as "daytime"; otherwise it's known as "nighttime".
• Position 0 equals 3 Lux, Position ∞ equals max Lux and it's always regard as night no matter how bright around the sensor.
• Lux setting only works in Auto Mode and D2D Mode.

Time Knobs

• Time knob is used for setting working time from 1-10 minutes when it detects motion.
• Time setting only works in Auto Mode.

Range Knobs

• Rotate the knob to adjust the sensing range to max ca. 50ft motion coverage.
• When you mount the light over 7.8ft, please adjust the sensor upwards and set max range to increase the coverage area. Time setting only works in Auto Mode.
• Range setting only works in Test Mode and Auto Mode.

Attention

• Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
• Make sure that there are no other influence factors affect the performance of light.
• Be sure to disconnect the power before you install the light.
• Be sure to mount it in dry location, humid environment is not good for light's lifespan.

Dusk to Dawn

D2D features auto-on at dusk and auto-off at dawn to better satisfy different lighting needs. AUTO mode allows the light to auto-on after motion has been detected and auto-off after no motion has been sensed, built-in motion sensor with a 180° sensory angle and max 50ft wide sensing range.

Much Brighter, Much Safer

These motion sensor security lights have 2 super bright LED light heads with Premium Ceramic Heat Dissipation Technology.They produce up to 100lm/watt, high brightness and have superior heat dissipation qualities. Save on your electricity bill by up to 88% by replacing a 150W light with an 18W light.

Easy Installation

This electric-powered LED outdoor security light can easily be wall-mounted to a standard junction box, and is easy to install by following the user manual. Choose your preferred location to illuminate garages, workshops, courtyards, pathways, storage rooms, driveways, parking lots, and more!

Adjustable Design

There are four working modes, Test Mode, Auto Mode, On Time Mode and Dusk to Dawn Mode. More choices can meet different demand for each customer. Choose the most appropriate mode for your needs and desires.