FLARING Plasma Cutter Machine Pilot Arc 50 AMP 110/220V FL550D Non Touch 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine

Save 15%

Pattern Name: Un-Touch
Sale price$676.90 Regular price$791.90
Only 10 units left


  • 【Non-Touch FL-550】Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality and longer consumable life.(Breaker Recommendation:50A on 110V,30A on 220V)
  • 【Cutting Ability】10-50A dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220V. 10-35A DC output,1/3" ideal clean cut and 2/5" maximum severance cut on 110V. Work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome
  • 【Advanced IGBT Inverter】Save energy and noiseless, high cutting speed,cutting smoothly. The conversion line is easy to transfer from input 110V to 220V dual-frequency (110/120V 220/240V 50/60hz). Air pressure 60-70psi recommended.
  • 【Safe Design】Built-in over-heat,over-voltage protection,it is under-voltage protection.It is not only can be suitable for businesses and DIY users but also fully accommodating the demands of professional operators.
  • 【Warranty Assurance】We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,3 year's warranty.Please add to cart and take it without hesitation

Product Description


How does plasma cutter work?

What is Plasma?

Plasma cutters work by sending an electric arc through a gas that is passing through a constricted opening. The gas can be shop air, nitrogen, argon, oxygen. etc. This elevates the temperature of the gas to the point that it enters a 4th state of matter. Scientists call this additional state plasma. As the metal being cut is part of the circuit, the electrical conductivity of the plasma causes the arc to transfer to the work.

How does it work?

The plasma arc formation begins when gas is forced through a small nozzle orifice inside the torch. An electric arc generated from the external power supply is then introduced to this high pressured gas flow, resulting in what is commonly referred to as a “plasma jet”. It immediately reaches up to 40,000° F, quickly piercing through the work piece and blowing away the molten material.

About the Air Compressor

FLARING plasma cutters need compressed air to create the plasma.

FAQ About The FL-500D

  • FL-500D is an non touch plasma cutter.
  • 50A breaker for 110V and 30A for 220V recommended
  • The FL-500D plasma cutter can work with a generator(5000W above)
  • What kind of gas do you need for a plasma cutter? It is compressed air.
  • Please observe all safety notes and precautions detailed in the manual.
  • The sale service will be void if the machine be disassembly or modified without consent

Advantage of the plasma torch

  • FL-550D plasma cutter equipped with AG60 which is a non-touch cutting torch.
  • Better for materials with coated,paint,stains, and rust on the surface with great effect.
  • Cutting faster, more efficient than touch arc plasma cutter.
  • Consumables are durable than PT31 torch

Consumable of the Plasma Torch

  • The contact tips erode over working time,so they are required replaced periodically.
  • Quality of the air used is paramount to their longer life, in short clean dry air gives longer parts life.

The Cutting Quality

  • The correct height of the torch and cutting at a 90° can ensure longer life of the consumables,the best way to reduce the bevel angle is to cut with the correct current at an appropriate speed and height.
  • The plasma flow may not be able to cut off the material completely if cutting higher and large angle.

After-sales Service

  • FLARING provides 3-years of product quality service.
  • Failures other than the machine case can be replaced within 30 days if you have a problem with the machines.
  • Local support is available for all of our customers.

plasma cutter torch

torch contact tips

how to cut

plasma cutting ability

How to use the plasma cutter machine?

1. Check the package

1. AG60 torch, 2. ground clamp, 3. regulator, 4. raw tape, 5. regulator holder, 6. wrench, 7. hose, 8/9. consumables, 10. hose clamp, 11. voltage conversion, 12. FL-550D,

Please get supports in time if anything missed.

2. Connection 1

  • Connect the ag60 non contact torch
  • Connect the ground clamp
  • Refer the user manual

3. Connection 2

  • Connect the air compressor
  • Connect the air regulator
  • Refer the user manual

4. Set the current

  • Read the user manual
  • Clamp the metal with ground clamp
  • Power on the FL-550D
  • Set the current
  • Start cutting

What FLARING Provides?

Plasma Cutter Consumables

  • To ensure that you can quickly use the machine.
  • please find the buyer support after you got the FL-550D plasma cutter and get the consumables.
  • 35pcs as shown up in the picture

Sales Service

  • A 3-year service provided for all the machines.
  • Failures other than the machine case can be replaced within 30 days if you have a problem with the machines.
  • Local support is available for replacement,repair etc.

What are the Advantages?

  • 4 IGBT, stable and powerful.
  • industrial cooling fan,to improve the duty cycle.
  • 4 rectifiers, 3 high-power large capacitors, making the machine more stable.
  • The main transformer of all copper, the power is larger.

Manufacture Testing

  • Accurate Test: continuing to provide high current to ensure that each machine can bear still can stabilize output
  • Simulation Test: undergoes 30 minutes of simulation work, easily cope with voltage fluctuations
  • Manual Test: achieve easy arc, continuous arcing


  • We are a traditional enterprise that integrates production,research,development and sales, has been deeply involved in the field of welding for nearly 10 years.with domestic and international basis as well as professional certification

High Frequency Transformer

  • The FL-550D plasma cutting machine comes with 110V/220V voltage conversion cable which can recognize the voltage automatically
  • Attention:it is recommended to use a circuit breaker above 40A for 220V,but 60A for 110V.

FL-550D Application

Any kind of metal that is electrically conductive is well suited. You can cut these kinds of metal from a sheet metal thickness of 1-2mm up to 1-2 inches:

  • Mild Steel/Stainless steel
  • Carbon steel/Copper
  • Brass
  • Aluminum
  • Expanded steel
Voltage 110/220V 50/60Hz 110/220V 50/60Hz 110/220V 50/60Hz 110/220V 50/60Hz
Plasma Cutter Type Contact ARC Non Touch ARC
Air Demand 1.4 CFM 1.4 CFM
Ran off a generator? Yes,5000W above Yes,5000W above Yes,5000W above Yes,5000W above
Clean Cut 1/2 inch 1/2 inch
Max Cut 5/8 inch (220V) 5/8 inch (220V)
Breaker Demand 40A-220V,60A-110V 40A-220V,60A-110V 40A-220V,60A-110V 40A-220V,60A-110V
Max Current 50A 50A 135A 180A
Cord Type 3 prong 220V 50A 3 prong 220V 50A 3 prong 220V 50A 3 prong 220V 50A
Consumables Available in our store Available in our store Available in our store Available in our store for FL-550D plasma cutter

Payment & Security

Payment methods

Amazon American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Estimate shipping


Recently viewed