hygger Aquarium Programmable LED Light, Full Spectrum Plant Fish Tank Light Extendable Brackets with LCD Setting Display, IP68 Waterproof, 7 Colors, 4 Modes for Novices Advanced Players

Save 15%

Size: 48W for 30~36inch long fish tank
Sale price$90.90 Regular price$106.90
Only 10 units left


  • 🐟4 Modes: ①Default Mode. L: All-optical + Blue light(can change); Brightness is simulated sunrise to sunset + night effect. ②DIY Mode. L1-L6: All-optical; L7-L8:Blue. The brightness(10 kinds) and time (any time) of each stage(8 stages in total) can be set by yourself. ③Gradient Mode. The brightness time cannot be set. Cycle colors-dark blue, green, purple, light blue, yellow, red. ④All-day All-optical Mode.Can fine-tune the color temperature of RGB light, can not set the brightness and time.
  • 🐠New Upgrade: Lamp beads IP68 waterproof, and easy to clean and wipe. The separable adapter, even if it is damaged, no need to replace the light to avoid waste. Power off memory function, after the power is restored, the local time of the light will default to 12 noon, other settings remain unchanged, and then continue to run. The extendable bending bracket can be adjusted in length and easy to install, and can be applied to various freshwater tanks.
  • 🐡High-quality Light: the color of the fish tank light is all-optical, dark blue, green, purple, light blue, yellow, red, dark red (sign of the start color cycle mode). The light is soft, the color rendering index is close to natural light, up to 89%, protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers. Using high-quality 2835 + 5050 model lamp beads, long service life, at least 50,000 hours. And there are 10 kinds of light brightness can be adjusted.
  • 🌿LCD Display Operation: There are four function keys, mode setting / up / down / light setting keys. The main screen mainly displays the real-time local time (optional 12 hours/24 hours), the time is accurate to the second. The following two small screens are program timers, which used to set the start and end time of day and night in mode.
  • 🍂Technical Specifications: Aluminum alloy plastic case. ①LIGHT SIZE:30*10*2.2cm. ②APPLICATION: 12~18inch. ③INPUT VOTAGE: AC100-240V. ④OUTPUT VOTAGE:DC15V. ⑥LED QUANTITY:40PCS. ⑦RENDERING INDEX:89. ⑧LUMENS:927. ⑨Color temp:6500-10000K. ⑩POWER CORD:4.9ft.

Product Description

Hygger aquarium extendable LED light is amazing. It’s easy to use and perfect to program. There is no need to set when selecting the Default Mode. It is suitable for junior players to use in their first fish tank. It completely simulates the light of nature, and your fish will like it. There are also a variety of DIY Modes, suitable for advanced players, with a variety of settings to meet some special fish species or plants.

PS:The product packaging and instructions have been improved.

Default Mode

The Default Setting:

  1. Full spectrum white light in the day and blue in the night.
  2. Full spectrum period: 06:30-18:30, blue light period: 18:00-23:30.
  3. The brightness of the light changes in accordance with the curve designed.

Can Set:

  1. Night colors can be changed, there are 6 kinds in total: dark blue, green, purple, cyan, yellow, red.
  2. You can change the full spectrum white light period start and end time; night start and night time.

NOTE: No matter when the set time starts, the brightness of the light will gradually become brighter.

DIY Mode (suitable for plants tanks)

  • 8 Time Stages: L1, L2, L3, L4, L5, L6 ---- All-optical; L7, L8 ---- Blue light;
  • 10 Brightness: 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%;
  • 8 Stage Setting Time: Any Time;

In each time stage can only set a brightness, and the start and end time of this time stage are set by yourself.

PS: No matter what time you set the end of the night, the lights will not turn off immediately, the fish tank light will turn off completely after 15 minutes. The brightness of the light for these 15 minutes is slowly dimmed until there is no. The purpose is not too scared your fish, not to suddenly turn off the light and not to suddenly turn on high brightness, which will give the fish a buffer stage.

Gradient Mode (Cycle Mode)

  • Adjust the color of the light to dark red (after the yellow light), wait for about 20 seconds, and then begin to appear the color cycle - dark blue, green, purple, cyan, yellow, red.
  • To turn off the DAY-L and MOON-L, it can continue to cycle, the next day's light color is also a cycle mode.

Brightness Change

There are 10 kinds of brightness can be adjusted, to simulate the effect of sunrise to sunset, and the brightness of the light can be set in different 8 Time Stages, which can realistically simulate natural light. Not only can it brighten the fish, it can also be applied to the growth of aquatic plants and promote photosynthesis.

Warm tips

The settings are wrong or the settings are confusing, you can restore the factory settings and start over. In the non-DIY mode, long press the up and down keys at the same time for a few seconds, until "SOP" appears, then unplug the power and plug again, it can restore the factory settings.

High efficient heat dissipation

The fin design increases the heat dissipation area, 0.05in thick aluminum. Note: why the aluminum surface of our hygger fish tank light appears heat.Because there is a heat dissipation sticker between the lamp bead and the aluminum material, there is no gap, and the heat is directly radiated to the outside, and the heat will not be stored in the light. The residual heat will damage the lamp beads, light decay, and even damage the power supply after a long time.

Suitable for many fish tanks

There are 6 sizes, and the extendable bracket, there is always a light that can be used for your fish tank. The use of a separable adapter will not cause the waste of replacing the LED light due to adapter damage. When there is a problem, if the display of the light can light up, it is not a power problem and the light needs to be replaced or repaired. If the screen flashes and then dims, or keeps dimming, it is a problem with the power supply, and you only need replace the adapter.

Rendering index 89

The irradiated light is softer and does not hurt the eyes, the light is more stable. If you use a mobile phone to take pictures,the screen is not flashing, the eyes and the fish are protected. The spectrum is smooth, close to the sunlight, the light is more natural. 5 rows of lamp beads, the light surface is wider, the color is bright. High lumens, translucent fish tanks, and brighter plants.

Waterproof grade IP68

Waterproof grade IP68, fully sealed and waterproof, high light transmittance, waterproof and easy to clean. Long-term use does not decay, the light effect is pure and transparent, the life is long, and it can be used for tens of thousands of hours.

separable adapter

security adapter

extendable bracket

high-quality lights beads

Watts 20W 26W 36W 48W 60W 72W
Suitable for for 12~18inch long fish tank for 18~24inch long fish tank for 24~30inch long fish tank for 30~36inch long fish tank for 36~42inch long fish tank for 48~55inch long fish tank
Kelvin 6500-10000K 6500-10000K 6500-10000K 6500-10000K 6500-10000K 6500-10000K
Lumens 927 1290 1984 2365 2879 3346
LED QTY 40 Pcs 77 Pcs 112 Pcs 144 Pcs 178 Pcs 248 pcs
Output Voltage DC 15 V 1.5 A DC 15 V 1.5 A DC 20 V 2 A DC 20 V 2 A DC 20 V 3 A DC 20 V 3 A
Input Voltage AC100-240V AC100-240V AC100-240V AC100-240V AC100-240V AC100-240V
Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

Payment & Security

Payment methods

Amazon American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Estimate shipping


Recently viewed