- The single-head waterproof signal line is divided into male and female connectors, and the other end is the signal line of the corresponding color, which can be used according to the drawing.
- There are 2Pin/3Pin/4Pin/5Pin/6Pin Connectors with Multiple Specifications to Make Your Modification Easier
- The 900 mm cable length is enough to modify the lights, displays, Ebreak and throttle on electric bicycles, electric motorcycles or electric scooters
- Waterproof grade IP66, when the cable is exposed, you don't have to worry about short circuit or water ingress. It can be used perfectly in rain and snow
- It Can Be Used not Only On Electric Bicycles, But Also Where You Need to Use Signal Cables in DIY Can Meet Your Needs.
- We use 's FBA warehouse, your order will be shipped in the nearest warehouse, and the package will reach you in the shortest possible time.
Ebike Extension Cable 2pin/3pin/4pin/5pin/6pin Julet Female/Male Single Head DIY Waterproof Line for Electric Motorbike Kit Light Throttle
JULET Ebike Cable 2pin/3pin/4pin/5pin/6pin Female/Male Waterproof Head Single Line
- There are 2PIN/3PIN/4PIN/5PIN/6PIN and other specifications. One end is a waterproof cable and the other end is a loose cable. Please refer to the picture for the corresponding circuit diagram.
- JULET brand signal cable, waterproof connector is suitable for outdoor use, IP66 waterproof allows the cable to be used in rainy days, without worrying about the problem of water ingress and short circuit of the connector,
- Especially suitable for the use of bare lines on electric bicycles, electric scooters, and electric motorcycles , It can also be perfectly matched on outdoor equipment
Various models to choose from
- 2 pin Female/Male-900mm
- 3 pin Female/Male-900mm
- 4 pin Female/Male-900mm
- 5 pin Female/Male-900mm
- 6 pin Female/Male-900mm
Signal line for bicycle Lights/Throttle/Ebrake/Display/Control of electric bicycles or electric scooters
Under what circumstances would you choose?
- When you're concerned about loose fittings or water ingress
- When you need to use the device in rainy or wet conditions
- When you think ordinary cables are cluttered
- When you are concerned about poor contact causing unstable signal
- When you DIY the pursuit of more beautiful cables
- Be careful when you need to plug and unplug cables frequently
- Operating temperature range: -40℃~+85℃
- Rated voltage: 200V AC
- Rated current: 3A (determined by cable according to specific conditions)
- Contact resistance: ≤10mΩ
- Contact: Copper alloy tin/gold plating
- Protection level: IP66
- Mechanical life: 200 times
High quality copper wire, stable signal, double insulating rubber tube on the outside, durable.
High quality rubber material can maintain good insulation and protection function at -40 ° C ~ +85 ° C
|Temperature range:||-40 ° C ~ +85 ° C|
|Rated voltage:||200V AC|
|Rated current:||3A (determined by cable according to specific conditions)|
|Insulation resistance:||≥10MΩ under normal conditions and humid conditions|
|Withstand voltage:||AC 200V 50Hz 1 minute without breakdown or flashing|
|Contact:||Copper alloy tin/gold plating|
|Mechanical life:||200 times|
|Maximum outer diameter:||9mm|
|Use wire specification:||0.05mm-0.2mm 2|
|Applications:||Power supply and signal transmission for electrical and electronic equipment（Light/Throttle/Ebrake/Display）|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.