- 🚴【Output】52V 13AH e bike battery, Domestic 2600 battery cell, Suitable for 1000W 750W 500W 350W e-bike motor, 30A BMS Protection board, Max Constant Discharge Current: 30A, Charger: 58.8v 2A
- 🚴【BMS Protection Board】High quality electric core and equipped with a 30A BMS protective plate, prevent over charge, over discharge, over current and short circuit and ensure the long life expectancy
- 🚴【Performance】Black hard plastic shell effectively protects the battery and LED battery level light can inform you of charging in time, The USB port can charge your phone and other devices in outdoor. The product comes with Anderson connectors. If you need other connectors such as XT60, XT90, Small Bullet, please contact us immediately after order
- 🚴【Technology Skill】Comes with a charger, when charging, please open the switch and charge for at least 8 hours, when the red light of charger turns green, it means fully charged. Friendly reminder: Please purchase the battery which is suitable for your motor, if you don't know whether it fits for your bike, please contact our store.
- 🚴【Warranty Policy】Ship from CA, US, normally it takes 2-5 business days to delivery. All our batteries enjoy 1-year warranty. We have professional technical team in USA based to offers the best customer support. Lifetime technical support,( Any other Volt, wattage and request, please contact with us, we can customize for you )
[2-5 Days Fast Delivery] shipped from U.S Warehouse
- US Warehouse (CA) - We ship from CA, US, normally it takes 2-5 business days to delivery.
- One Year Quality Support - Contact our store when you have any problems. We usually reply in 12 hours.If you don’t receive our reply, please check your junk mail or send email to our mailbox, JoyisiService @outlook. com
- Suitable Motors - Our battery can fit most motor kits, for example: Bafang, Voilamart, but exclude these four : Bosch, SHIMANO, Yamaha, Panasonic
A Grade Battery Cell
We use 2500mAh 18650 cells and 4800mAh 21700 Cells. The number of inner cells of batteries with different specifications is different, such as 48V13AH, it takes 65PCS cells(13*5=65) to reach 48v 13Ah(13S5P)
In addition to we also produce batteries with Imported inner cells. If you need to customize, please contact our store directly.
BMS Protection Board
Equipped with the BMS protection board, with over discharge protection, reverse current protection, overpower protection, short circuit protection, overcharge protection, over current protection
Each battery Pack have pass the voltage test, cell Aging test, function test before shipment. Have UN38.3, CE, Rohs and other Certificati
For better charging:
Please turn on the power switch of the battery and charge it for about eight hours. When the indicator on the charger changes from red to green, it means that the battery is fully charged. At this time, press the battery power display button, and the battery should display three green and one red.
1. Please use the charger carried in our package for charging.
2. Store the battery in a dry, non corrosive gas environment, away from flammable materials (such as packaging materials, cartons, etc.)
3. If the lithium battery is not used for a long time (such as more than 6 months), please charge 50%~70% of the power and store it in a dry and cool environment, and charge the battery every 3 months to avoid too long storage time and irreversible capacity loss caused by low battery power due to self discharge.
4. If long-term storage causes battery leakage, serious rust or expansion, please do not continue to use the product.
How To Connect
The discharge wire of the battery is not directly connected to the connector to prevent trouble and misunderstanding from being inconsistent with the customer's needs. However, there will be a pair of free connectors with lines (battery end and controller end) in the package, which can be connected directly if needed.
Easy to connect without tools.
1. Use scissors to cut off a small section of rubber of the battery discharge wire and the connector line to expose the metal wire.
2. Connect the red wire to the red wire, the black wire to the black wire, and twist the metal wires of the corresponding color together.
3. Wrap the connection with electrical tape
After connecting the connector line to the battery, the other end of the connector can be directly connected to the controller or the motor.
This battery with Anderson connectors inside the package.
If you need other kinds of connectors, please contact with me before purchasing.
|Battery Cell||A Grade G2500 Cell||A Grade G2500 Cell||A Grade G2500 Cell||A Grade G2500 Cell||A Grade G2500 Cell||Tesla 4800/21700 Cell|
|Apply for Motor||200W-1000W||200W-1800W||200W-1000W||200W-1000W||200W-1800W||200W-1600W|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.